Hi. I have the Phanteks Evolv X with three halo RBG fan frames. I have an Asrock x470 mbd with an addressable RBG 5v header and 2 regular 12v RGB headers. I can daisy chain the three halo fan frames to make one single connection. But I also have the digital rgb connector coming from the case since it has RGB built in. My question is how do I connect everything so they are synchronized and I can use software Asus Aura. Can I use the Phanteks Digital controller hub and connect the halo fan connector and case connector to the hub and then connect the hub to the 5v aRGB header on the motherboard? Would a Digital RGB splitter also work? Thank you