Results 1 to 4 of 4

Thread: Devotion: a Hardcore Shift X - watercooled, oc'd to the limit, RGBW custom cables.

  1. #1

    Devotion: a Hardcore Shift X - watercooled, oc'd to the limit, RGBW custom cables.

    A huge ITX system that is all about beauty and raw power.

    Supported by Watercool
    Made with <3 by Enter Plasma

    Main Features:
    9900K & RTX 2080 with heavy OC in a Shift X
    Custom, high end, high performance Watercooling
    Custom RGBW Cables in MDPC-X Sleeve
    Custom Illumination
    "Fixing" the Phanteks Shift X and pushing its limits with sheer brute force
    A lot of other fancy small details worth checking out

    Hardware List:
    CPU: Intel Core i9 9900K
    GPU KFA2 RTX 2080 OC
    Motherboard: Asrock Z370 ITX Fatal1ty
    Ram: Corsair Dominator Platinum DDR4 16GB 3000
    SSD: Samsung 970 EVO 1TB
    PSU: Corsair SF750
    Case: Phanteks Shift X
    RGB Controller: Raspberry Pi Zero WH

    Cooling / Accessories:
    CPU: Watercool Heatkiller IV Pro Acetal Ni
    GPU: Watercool Heatkiller IV RTX 2080 Acetal Ni
    Reservoir: Watercool Heatkiller Tube 100 DDC
    Pump: EK DDC 3.2 PWM
    Rads: Hardware Labs Nemesis GTS 240 + 120
    Fittings: Barrow Black
    Tubing: Barrow PETG 14/10
    5x Delta AFB1212SH Fans
    EVGA Powerlink
    PCI-E 3.0 Riser for Phanteks Shift X
    Aluminium M.2 Heatsink

    Custom Stuff:
    Stainless Steel Screws + Alu Washers
    RGBW Sleeved Cables with MDPC-X Carbon BTI & Transparency
    RGBW Light Bars, other illumination in White
    Twister Mod Stickers (Fans)
    Custom Motherboard IO Plate

    A big shoutout for the help, support and/or inspiration to:
    Jacob (Watercool Heatkiller)
    Daniel (Twister Mod / Twister7800GTX)
    Nils (MDPC-X / Million Dollar PC)
    All the customers of Enter Plasma that supported me over the past 3+ years

    First Pics:

    Last edited by Enter Plasma; 06-01-2019 at 09:20 AM.

  2. #2
    Super Moderator
    Join Date
    May 2013
    United Kingdom
    Nice! Look forward to seeing more.
    =i7 980X @ 3.55GHz =PH-TC14PE w/2x TY-147A fans =Crucial Ballistix 3x4GB =GA-X58A-UD5 =ENGTX580 DirectCU II =e quiet! Straight Power E10 500W =Enthoo Evolv w/2x PH-F140XP case intake fans;

  3. #3
    UPDATE #1: Finally received the last hardware, work is getting done

    Started doing the first tests with RGBW cables, using MDPC-X Transparency sleeve and MDPC-X transparent AWG15 wire.
    The controller is a random addressable chinese one that can be controlled with an app. It's not bad, but it's a bit buggy. Not an ideal solution, but I'll keep it for now.

    The LED strips for the cables, on the other hand, are glorious. These are addressable RGBW, 144 LEDS / meter. They're beautiful, and also inhumanely expensive lol.

    Got the latest shipment from China that was delayed for more than a week unfortunately.
    A lot of fancy stuff, but turns out I need more screws. Some of the sizes were incorrect.

    Fancy stainless steel screws. I absolutely love these, specially together with the aluminium washers.

    Also got a new clear IEC connector to re-make the stock PSU extension for the case. It lights up really well

    Some other stuff that arrived recently: SSD, hardline watercooling gear, cable and sleeving material from MDPC-X, and some aluminium bars for LED strips that I'm still not sure about using for this project.

    And the replacement riser I'll be using. Unfortunately the original Phanteks riser doesn't seem to be PCI-E 3.0 capable.

    NEXT: A lot of cables
    Last edited by Enter Plasma; 06-01-2019 at 09:46 AM.

  4. #4
    UPDATE #2: Fan cables & LED's in the works

    Work has been slow but steady.
    I'm currently doing all the splitter cables for fans, LED's and the sorts. They still have to be sleeved of course!
    It is a massive work but it's very important - using as less space as possible for cables is top priority for maximizing airflow.

    Here's where some of the addressable LED's will go, these will light up the cables from the bottom.

    And this is a rough idea of how they'll turn out.
    These are not the cables for the project, but I'm thinking about going with this same color scheme (Carbon BTI + Transparency)

    This is a rough idea of how the back will be cable managed.

    I also had this chinese RGB controller that I though of using, but it was HUGE

    So I pried it open...

    ... And burned the Bluetooth controller trying to desolder those green cable clamps, LOL.
    WELL, I guess I'll take the opportunity to do something I've been wanting to try for a while. Using a Raspberry!
    It will arrive around next week so we'll see about that.

    I also ended up upgrading to a Corsair SF750 Platinum

    And I was able to fit another fan on the bottom, for a 120 push/pull. Can't have enough fans in here.

    Another issue is these fan screws that have to be trimmed. I'm using M4's and they either come in sizes 30mm or 35mm.
    30mm is too short and won't screw in the rad. 35mm is too long and will hit on the fins before screwing in all the way.
    These are stainless steel, it's not easy to cut. I'm gonna have to figure out some way.

    In the pic you can also see some black aluminium columns that I got to cover up the screw thread. I think it looks really cool!

    And finally, this is how I'm ending up with the fan configuration. It's all negative pressure, and the air will be sucked in from the whole of the back.

    NEXT: Finished secondary cables, installing the hardware and doing the main cables!
    Current Projects:
    Devotion: a Hardcore Shift X.

    "Quality means doing it right when nobody is watching."
    Follow me on: FB / IG / YT /

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts