Phanteks P300 Eclipse Case LED connection with motherboard

[biL4]

Hello People,

So I have the Phanteks P300 Eclipse White.

Unfortunately the LED button does not work and there is no possibility at the moment to switch the color, mode or even turn them off. I'm stuck on static red color.

Is there any way to connect the LED board to the motherboard RGB header?

I already bought the Phanteks RGB Adapter but was no good. The adapter headers simply does not fit in any of the led cable sockets or the led board.

I'm doing something wrong or this is not possible ?

Motherboard: Gigabyte Z390 Aorus Pro Wi-Fi

[biL4]

alll good thnx

[doyll]

So what was the problem and how did you fix it?

[doyll]

So what did you do to you fix it?

[biL4]

Well there was no problem just that the label on the extension cable states that those plugs should be connected only with "Phanteks Multi-color LED strips".

So the working method was to keep the case led plugged as they are and connected the RGB adapter from the motherboard to the Phanteks extension cables (the one that is plugged in the case led board and has two RGB headers). Very simple. The label on the extension is very confusing.

[doyll]

Yeah, instructions are often poorly written.