Results 1 to 2 of 2

Thread: P400s CPU Cooling

  1. #1

    P400s CPU Cooling

    So I was wondering if I could get the NZXT Kraken X61 and put the radiator in the front? I'm wondering if the tubes will stretch long enough and won't be at risk of ripping.

    http://pcpartpicker.com/product/FFFP...oler-rlkrx6101

  2. #2
    The NZXT Kraken X61 tubing is apparently 400mm(15 and change inches) in length.

    I couldn't find a tube length description online anywhere for the Corsair H115i, but I do know then handling the cooler, the CPU block goes past the bottom of the radiator with the tubing going long ways. The H115i radiator measures 312mm so it is probably close to 400mm as well. This setup leaves PLENTY of length of tubing from the CPU to the front of the case.

    IMAG1145.jpg
    i7-6700k @ 4.8 Ghz - ASUS ROG VIII Ranger - Samsung 950 PRO M.2 - EVGA GTX 1070 FTW HYBRID
    All for work....and games...of course...

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •