Results 1 to 2 of 2

Thread: PWM Fan Hub - Not working

  1. #1

    PWM Fan Hub - Not working

    http://imgur.com/a/FOLrM

    Please see images in linked album above.

    The 4pin to 4pin cable is plugged into the CPU FAN header on my mobo.

    The 4pin does not power the fans if I plug it into the 4pin port on the hub, with or without the SATA power plugged in.

    The 4pin will power the fans if I plug it into a 3pin port on the hub, with or without the SATA power plugged in (this is no use to me as I want to control the fans).

    The hub LED will light up if I plug SATA powr in, but fans will not spin unless the cable from mobo is connected to a 3pin port.

    4pin port on hub does not seem to do anything.

    This is the product I purchased http://www.phanteks.com/PH-PWHUB.html

  2. #2
    Super Moderator
    Join Date
    May 2013
    Location
    United Kingdom
    Posts
    591
    No idea what original problem was, but you have plugged it in so many wrong ways that I can't even begin to guess how many ways you may have shorted things out on hub PCB.

    Sorry to be so blunt, but you should have followed the instruction manual and never plugged power into circuit connections (headers) that are designed to have fans plugged into them to receive power.

    PWM hub installation manual shows and explains how to hook it up. If that did not work and you had not done all the other combinations I might have been able to help you figure out the problem. But now I have no idea what damage many have been done, so no idea how to resolve your problem.
    =i7 980X @ 3.55GHz =PH-TC14PE w/2x TY-147A fans =Crucial Ballistix 3x4GB =GA-X58A-UD5 =ENGTX580 DirectCU II =e quiet! Straight Power E10 500W =Enthoo Evolv w/2x PH-F140XP case intake fans;

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •