Results 1 to 3 of 3

Thread: My humble rig

  1. #1
    Super Moderator
    Join Date
    May 2013
    Location
    United Kingdom
    Posts
    852

    My humble rig

    Couple pics. Sorry about the quality. First is with stock fans. Second is TY-143 fans. Third is latest w/ duct out back.
    Phanteks with stock fans.sJPG.jpgPhanteks with TR-TY-143 fans.jpgIMG_3641.jpg

    I built a caster base to raise case & give easy movement, removed stock grills on bottom & back, modified front intakes to accept 140mm fans w/120mm mounts and use Silverstone magnetic mounting filters for better airflow and quieter performance. No exhaust fans and 3x TY-143 case fans are controlled by PWM signal from CPU_Fan socket on motherboard. Fans idle at 700rpm and normally maximum CPU = 48c@980rpm at about 85-95% load all cores. If I stress it to 98-100% all cores fans speed up to 1050rpm @48c; that's with 22c ambient.
    =i7 980X @ 3.55GHz =PH-TC14PE w/2x TY-147A fans =Crucial Ballistix 3x4GB =GA-X58A-UD5 =ENGTX580 DirectCU II =e quiet! Straight Power E10 500W =Enthoo Evolv w/2x PH-F140XP case intake fans;

  2. #2

  3. #3
    Super Moderator
    Join Date
    May 2013
    Location
    United Kingdom
    Posts
    852
    Thanks. Third picture is only one that is even reasonable quality.
    It's not fancy but it does a good job.
    =i7 980X @ 3.55GHz =PH-TC14PE w/2x TY-147A fans =Crucial Ballistix 3x4GB =GA-X58A-UD5 =ENGTX580 DirectCU II =e quiet! Straight Power E10 500W =Enthoo Evolv w/2x PH-F140XP case intake fans;

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •