Results 1 to 4 of 4

Thread: Recommendations for Airflow setup for Evolv mATX TG

  1. #1

    Recommendations for Airflow setup for Evolv mATX TG

    Just got this case and love the look.

    I currently have a EVGA CLC 280 from the front drawing in air and put one of the case fans on top exhusting in the middle and kept the one in the rear.

    I'm wondering if I should actually move the top mounted fan further back or do something else to improve the airflow as i'm afraid it might be rebounding some air back down into the case given the constricted top vents and open top radiator mounts. Any advice?

  2. #2
    Depending on the layout of things in the mATX case, some of the tweaks people have been making to the ATX version may help you out.

    Here's some changes I made to the ATX with 6$ in parts from Home Depot.

    http://phanteks.com/forum/showthread...ull=1#post3348

  3. #3
    I cant see the images for your post unfortunately

    I think for the tg matx they pushed out the front a bit already.
    I'm mainly concerned if I should be blocking the large gaps in the top exhaust and if I should move the fan to the rear or leave it in the mid like I have currently



    I pondered putting 2 fans on top but I don't think my CLC will allow the space for 2 fans.
    Last edited by zoglog; 06-21-2017 at 01:37 PM.

  4. #4
    For any case make sure to have negative pressure to offer the best cooling.
    Use high static pressure fans as intake and use high cfm fans as exhaust will yield the best result.
    There is no huge difference in 120mm vs 140mm in your case being short on space good 120mm fans will do just fine.

    While I did my setup on an Enthoo Luxe same principle applies for a smaller case.
    You can read up on airflow setups on my article here: https://www.hisevilness.com/articles...practises.html
    - Death Walks Among You.
    Everything me in one place: https://www.hisevilness.com/

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •