Results 1 to 2 of 2

Thread: Enthoo Luxe PWN Fan Hub doesn't work, no fans are on

  1. #1

    Enthoo Luxe PWN Fan Hub doesn't work, no fans are on

    As the title says the PWN Fan hub doesn't work.

    I plugged in the 4 pin into the CPU fan on the motherboard and my kraken into the AIO one.

    The SATA power is plugged in, all the fans are plugged in but when the computer starts none of the fans work.

    I plugged the fans into the motherboard directly and they work. I tried a fan into the CPU fan and it works. Tried to connect the hub to another SATA power connection and nothing.

    So the fan themsevles work, the CPUfan connection on the mothareboard works but not the PWN hub.

    What can I do? Can I return just the Hub?

  2. #2
    Super Moderator
    Join Date
    May 2013
    United Kingdom
    While you do not say what motherboard or what Kraken you have, I would not plug our Kraken into the fan hub.

    Read the Kraken installation instructions and Phanteks hub hookup instructions very well and hook them up as instructed.

    I'm guessing but I think once you get it connected properly it will work.
    =i7 980X @ 3.55GHz =PH-TC14PE w/2x TY-147A fans =Crucial Ballistix 3x4GB =GA-X58A-UD5 =ENGTX580 DirectCU II =e quiet! Straight Power E10 500W =Enthoo Evolv w/2x PH-F140XP case intake fans;

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts