View Full Version : PH-F140SP LED Switch

07-20-2016, 09:56 AM
Hey all,
I bought 4 PH-F140SP LED fans for my Enthoo Luxe. I know there is the switch adapter with button on it to turn the LED lights on or off. If I do not use the adapter with switch, does this connect to the case somehow? I read somewhere about connecting them to the case I/O for a button to toggle the LEDs. Is this true?


07-22-2016, 05:27 PM
I have the Primo and purchased the same fans. There are two connectors on it plus the manual LED button. One connector is for the fan header and the other is for the LED connector. It looks like the Luxe has the LED cables connected to the front of the chassis like the Primo. You'll need to connect the LED connection from the fan to the LED cable attached to the power board at the front of the case. the LED cables will have "LED" labels if they are the same as the Primo case. There should be a button next to the power switch that lets you turn the lights on and off.

09-23-2016, 01:17 AM
want to play casino must Web casinos GCLUB gclub royal (https://www.thgclub.com/)

05-31-2017, 04:26 AM
play goldenslot (https://www.golden-slot.com/) casino online now!!!!!

ทางเข้าจีคลับ (https://www.gclub-casino.com/)
บาคาร่าออนไลน์ (https://www.gclub-casino.com/baccarat/)

05-31-2017, 11:24 PM
thats good, tanx a lot