PDA

View Full Version : led fan enthoo prime



gigi75vr
07-29-2016, 05:03 PM
sorry for my the inglese.ho bought a enthoo first, but I do not know how to adjust the speed of the fan. and then the two front fans do not know how to let you turn on the blue LEDs light..grazie at all.

neonz
07-31-2016, 05:05 PM
Fan speed may be controlled by your motherboard in the BIOS. On my ZPE10, that's how it works. Now, on the Primo, if you use the FAN Hub, you can connect the hub to the CPU fan header. Your motherboard may have a utility to control the RPM's of this fan, which, would then control the fan speeds of other fans connected to the hub. There are too many variations of motherboards and utilities to be specific here, but your motherboard MFG site should have information on this. You can also check out the forums for your particular motherboard.