PDA

View Full Version : Evolv ATX Tempered Glass / Radiator Mounting Question



hihu
10-29-2016, 02:31 PM
Hello, Im new to the forum.

I have ordered a Evolv ATX Tempered Glass case 2 hours ago and I have a few questions concerning the installation of my liquid cooling stuff.

I would like to install a 360mm radiator to the top and a 280mm radiator to the front. Do the conflict with each other or do I have to remove the midplate bracket with the hdd cage? Referring to the manual you have to do this when you want to install a 360 radiator into the front.

Because I thought I would like to install my pump down the hdd bracket. This is why I'm worried about it.
How long is the top radiator mounting bracket? Is it exactly 360mm long.
I would like to mention that my intention is to install radiators with 30mm thickness.

Thanks you very much

BTW when you have opened the forum and the click on the manual on the Phanteks Site your forum tab gets overwritten. I had to retype my post.

Pokemoneiei
02-02-2017, 08:49 PM
Thanks for the info
จีคลับ (https://www.gclub88.com/download/)

romanze7
02-03-2017, 11:50 PM
This is the best post.
maxbet (https://88maxbet.com/%E0%B8%97%E0%B8%B2%E0%B8%87%E0%B9%80%E0%B8%82%E0%B 9%89%E0%B8%B2-maxbet/)