PDA

View Full Version : Enthoo Evolv mATX TG



zlegendof
01-12-2017, 04:17 PM
I may by the only one excited for this case. It was shown at the beginning of this HardwareCanucks video


https://www.youtube.com/watch?v=cCulP4bSTlw&

Does anyone know when this will be available?

I'm really liking the swing-open side panel for this case. I have the Evolv ATX TG and boy is it a pain to open that side panel with the 4 thumbscrews, especially because of the smudges that get on it from touching. I wish they had implemented the swing-open side panel on the Evolv ATX...Small form factor is also becoming more appealing to me because I would like to be able to move the case around with ease.

Nehemz
01-16-2017, 02:23 AM
I asked Phanteks on twitter;
They said it will be out in march.

zlegendof
01-18-2017, 02:28 PM
I asked Phanteks on twitter;
They said it will be out in march.

Thank you very much for letting me know :D

I should probably start following them on Twitter...haha

Wachtel
01-27-2017, 12:51 PM
That case looked great! Hopefully they will take this door solution and apply it on the ATX case.

harrison
02-01-2017, 10:50 PM
I may by the only one excited for this case. .

Definitely not. I've been scouring the internet trying to find out when and if Phanteks was going to revisit the Evolv mATX. I've been trying to find one in Anthracite grey, and they're all out of stock or 2-3x MSRP. This post was the first one I've found with any information at all, and Demetri's video (which I somehow missed?!) is the ONLY one I can find that has coverage of this case from CES 2017.


I asked Phanteks on twitter;
They said it will be out in march.

Dude. THANK YOU.


I just wish I could find more detail now. I'm considering my money spent already at this point.

Draelren
02-16-2017, 03:26 PM
Also waiting to know what's going on with this case. If it's more than 2-3 weeks out I might just pick up a regular Evolv in the mean time... want to build my system and this is the last piece to order. The TG version of the case I mean.

Wachtel
02-18-2017, 03:54 AM
Must say I'm very tempted to switch from my Evolv ATX to this case. And update a few other things.

harrison
03-10-2017, 10:55 PM
It's March!!! Where's the announcement?!

Nehemz
03-13-2017, 04:23 PM
I've been scouring the internet trying to find out when and if Phanteks was going to revisit the Evolv mATX. I've been trying to find one in Anthracite grey, and they're all out of stock or 2-3x MSRP.

I hope that they do refresh the original windowed Enthoo Evolv mATX, with a bigger window.
And I do prefer the gray ones than the black and white.



It's March!!! Where's the announcement?!

I don't know. I'm still trying to patiently wait for it.
But if the time comes and there isn't one yet, I might go for the Fractal's Define Mini C.

JamesSneed
03-23-2017, 08:02 AM
This is a wonderful looking case. I really like the updates. Any chance a USB 3.1 Type c connector could be added? March is almost over any ETA on the release date of this case?

PlentyOfPockets
03-28-2017, 06:44 PM
I have asked Phanteks this question directly via email. The case is still coming. It's just gonna take longer than anticipated due to some delays. The case won't be released to the public until mid April.

makza01
03-29-2017, 06:55 PM
Asking for advice Enthoo Evolv mATX




ทางเข้า gclub (https://sbobetgoals.com/%E0%B8%97%E0%B8%B2%E0%B8%87%E0%B9%80%E0%B8%82%E0%B 9%89%E0%B8%B2-gclub.html)

de-eend
03-30-2017, 07:33 AM
I have asked Phanteks this question directly via email. The case is still coming. It's just gonna take longer than anticipated due to some delays. The case won't be released to the public until mid April.

Good i have waited 3 months i can wait one more.

harrison
03-31-2017, 08:54 AM
I have asked Phanteks this question directly via email. The case is still coming. It's just gonna take longer than anticipated due to some delays. The case won't be released to the public until mid April.

good to know. they've stopped replying to fb/twitter queries on the case. i'm just glad they've not gone completely dark. my next build is still in the planning stages, but the case will undoubtedly be the first purchase that begins that snowball.

hanr
04-02-2017, 02:45 AM
Enthoo Evolv mATX TG Get Suggestions




holiday palace (https://sbobetgoals.com/holiday-palace.html)

kevindd992002
04-07-2017, 05:22 AM
Are there any announcements regarding implementing the same upgrade to the ATX version of this case?

tomcruzz
04-10-2017, 01:09 AM
It's just gonna take longer than anticipated due to some delays. The case won't be released to the public until mid April.
โกลเด้นสล็อต (https://goldenslot.gclub-casino.com/)

kevindd992002
04-10-2017, 02:32 AM
Are you talking about the mATX or the ATX?

DIaMONd
04-10-2017, 10:16 AM
I have also asked customer service by the e-mail in February, so they wrote mATX would be in mid of April.
This week is the last before the middle of month.

kevindd992002
04-10-2017, 11:29 AM
How about the ATX?! Can anyone answer?!

JamesSneed
04-11-2017, 05:27 AM
Is there some type of notification list or something along those lines where we can buy these they day they come out? Thanks.

Wachtel
04-19-2017, 12:08 PM
HardwareCanucks review:

https://www.youtube.com/watch?v=-jWblNZ3Zsw

rezn0r
04-19-2017, 12:47 PM
TweakTown review:

http://www.tweaktown.com/reviews/8145/phanteks-evolv-matx-micro-tower-chassis-review/index.html

PixelKiller.se
04-20-2017, 08:49 AM
Was looking to buy the white old version, wanted a smaller white/black case to replace my old Corsair, but opted to wait for this updated version. Sadly though, they don't seem to come in white any more. Wonder why? :/

Also, the all-black sides kind of overtakes the aesthetics a bit much on the brighter variants. Looks better on the ATX version, with its framed border. IMO. :-)

nctu127
04-20-2017, 07:50 PM
Thank you for your input ! sbobet (https://sbobetsss.com)

DIaMONd
04-21-2017, 12:32 PM
And what about 200mm cooling fan in front of new one chassis?
It did not prove itself in the previous version of the model?

makza01
04-21-2017, 07:30 PM
Ask for advice About this site :D



แทงบอล m8bet (https://goo.gl/dtzefC)

kevindd992002
04-22-2017, 12:22 AM
Ask for advice About this site :D



แทงบอล m8bet (https://goo.gl/dtzefC)

What?! 10char.

zoglog
06-19-2017, 04:19 PM
Just got mine in last week and made my first build in 7 years. I love the TG look!

http://i.imgur.com/yLBWv73.jpg

A Few quips

- HDD led is nuts and kind of distracting, may just remove the header
- not sure what to do with the top space or a way to block off some portions of the top since I'm worried some air is bouncing back in with only one fan mounted to the top
- GPU fan def leaks sound out at full blast
- the back panel tg magnets were weak. Phanteks is sending me a replacement though so hopefully that fixes that.

NettingBot
07-13-2017, 02:52 PM
I finally got all my parts together to build in the silver Enthoo Evolv mATX TG. I wanted to fit a 280mm EKWB Predator and a 1080 w/ pre-filled EWKB water block so I had to take a Dremel to some of the bottom case area. In the end I think it came out pretty good although I really wish we had more openings in the top and front panel for airflow. Maybe vent slits, removable panels, just something to let air in/out.

758

achat
07-22-2017, 12:38 AM
Good i have waited 3 months i can wait one more.

zoglog
12-28-2017, 04:32 PM
curious if anyone has managed to improve front airflow on these cases?

vassp
03-03-2018, 05:58 PM
Just received this wonderful case yesterday. The standard airflow is a bit challenged, reason is the design of the case. Donít get me wrong itís a beautiful case but the Lian Li pca04 l had before had better cooling (stock standard) for air setup.
The reason why the Lian Li cools better is this.
The Lian Li had 2x 120 front intakes and a top exhaust 120 fan with no obstructions, (strangely no provision for rear fan only a small round grill outlet), i think it was a little shorter inside (front air had less to travel) but most importantly the case was a lot narrower, that helped to funnel the air from the front fans with more intensity and take it closer to the mb, l had placed a blu ray drive that sat above the top fan, and that kind of helped with some funneling too.

Itís early days yet, but Iím thinking for me to improve the evolve matx tg case Iíll have to put two higher spec/ speed fans upfront, maybe cut two holes in the front panel for unobstructed air, also a top exhaust fan should be at the top of my list, depending on what cpu cooling l choose l might make some kind of deflector inside to keep air towards the mb.
A little like a Venturi effect.

More testing for the next few days till l properly figure out what Iím going to do.

doyll
03-06-2018, 04:22 AM
In addition to my sig rig, I'm air cooling an Evolv ATX and an Evovl mATX with no problems. With both CPU and GPU at 100% load airflow temps into each cooler are only 4c maximum above room ambient with just front to back airflow. I did remove all PCIe back slot covers.

vassp
03-08-2018, 01:43 PM
Funny enough for me the Liam Li case l did not mod, and I was running stock intel cooler at the time too.

With the evolve I’m going to replace the stock cpu cooler with Noctua nh-c 14. Love my tower coolers but this time I’m up for a change.

Are you using two front intake fans for the matx evolve?
Cheers.

doyll
03-08-2018, 02:31 PM
C14 blows hot air everywhere.
Tower cooler move heated air back and out of case.
Less problems supplying cool air to coolers means nower operating temps.

vassp
03-09-2018, 03:48 AM
Still gonna try it though- c14 on order. It will Give me something to play with. I’m going to have the curved pipes next to the gpu and the end pipes facing the top of the case so hopefully the hot air will be expelled there. I’ll have the Exhaust fan - set on low just above the cooler make sure the hot air exits the case quickly. That’s the plan anyway.

vassp
03-09-2018, 03:52 AM
I had the old Thermalright 120 tower cooler from way back. Loved that unit- I ran passively (with no o/c) for ages. Super silent.

vassp
03-17-2018, 06:57 PM
Got my Noctua nh-c 14, it’s running like a dream, what a beautiful unit- looks great in my evolve matx tg, and very quiet. I have it running with the heat pipes pointing up and it’s performance is top notch. Highly recommend anyone on the fence in regards to this cooler and the evolve matx. It’s just my gpu(560ti) that is super noisy. That will be my next change.

nctu127
03-19-2018, 02:37 AM
Super silent. m8bet (https://snbbet.com/m8bet.html) casino viva9988 (http://casino-viva9988.com/) casino viva9988 (http://viva9988-casino.org)

zoglog
07-01-2019, 10:47 PM
ended up getting a rtx 2080 ti but it's much larger than my 1080ti. I have to move my front radiator to the top. Any issues with anyone doing so?