PDA

View Full Version : Separating fans from LEDs on a Eclipse P400S to run LED on ASUS' Aura



Curious D
09-11-2017, 06:42 AM
The fans and the LEDs pull their power from the same wire string that plugs into the SATA plug. Now when you try and plug those LEDs into an RGB header, they will be subject to the same configuration imposed by ther Aura software. So for example, if you place your Aura to do the "breathing" setting, this means your fans will stop and go if the same rhythm as the breathing setting. Very annoying. Therer must be a way to keep the fans on lets say the SATA power line and then place the LEDs on the same line that goes to the RGB. Any suggestions?