Results 1 to 2 of 2

Thread: GPU anti-sag bracket on p600s

  1. #1

    Question GPU anti-sag bracket on p600s

    I tried to install the bracket on the inside rear corner of the case as pictured on pg 21 in the Ps600S book, but it didn't seem to fit such that it would come even close to the GPU. So I tried to install it on the OUTSIDE rear corner, but that didn't make any sense at all. So back to the inside. When I moved my EPS cables out of the way, I discovered i could get the bracket in the corner and just barely get a finger in the channel enough to push the bracket up to where the holes lined up. Searching for some logic, I finally saw a u-tube video showing that the bracket keeps the GPU from sliding in the case mounting hole. The slots in the bracket line up with the positions of the removable port brackets, such that the GPU mount just fits inside the bracket.

    Hopes this help someone.
    Last edited by DocInator; 08-19-2019 at 12:34 PM. Reason: solved my own problem

  2. #2
    Super Moderator
    Join Date
    May 2013
    United Kingdom
    Thanks for the information. Very informative.
    =i7 980X @ 3.55GHz =PH-TC14PE w/2x TY-147A fans =Crucial Ballistix 3x4GB =GA-X58A-UD5 =ENGTX580 DirectCU II =e quiet! Straight Power E10 500W =Enthoo Evolv w/2x PH-F140XP case intake fans;

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts