Results 1 to 2 of 2

Thread: Evolv X - LED lighting not working

  1. #1

    Evolv X - LED lighting not working

    Could use some assistance. Just bought an Evolv X and finished the build. Plugged in the power connector for the front panel controller and I'm assuming the LED strips. I didn't plug in the motherboard connector due to the mb having a four pin and not three pin connector. The LEDs won't come on when the machine powers on. Checked all the connectors and everything looks solid. I didn't think that the mb connector is required for the basic lighting to work, but I could be wrong? Anybody else run into this? Could I be missing something?

    Thanks much.
    Last edited by hunterp; 06-08-2019 at 06:55 PM.

  2. #2
    Problem is solved. Apparently, it didn't like the power cable I was using to connect to the power supply. Changed out the cable and voila!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts