AMP GH
Fully Modular Power Supply | 1200
Introducing the Phanteks AMP GH Series, these units revolutionize cable management with sleek, individually textured cables for a pristine setup. Enhanced with a 120 mm Hydraulic Dynamic Bearing Fan, they deliver temperature-controlled operation in Hybrid Fanless mode, ensuring virtually silent performance.
With the latest PCIe Gen 5.1 GPU cable technology, the 12V-2×6 connector delivers up to 600W of power via a single cable. Engineered to meet ATX 3.1 specifications, the Phanteks AMP GH represents a superior and cost-effective choice for high-performance builds.
Colors
Wattage
Specifications
General
Model No.
PH-P1200GH_BK01
UPC Code
886523510246
Materials
Steel | ABS plastic
Color
Black
Dimensions
Length x Width x Height
140 x 150 x 86 mm | 5.5 x 5.9 x 3.4 in
Power Output
1200 Watt
PCIe Gen5 Output
600 Watt
80 Plus
Platinum
Technical Details
DC Output Ratings
Cooling Fan
120 mm Hydraulic bearing fan
Back Plate
Fully Modular
MTFB
> 100.000 hrs at 25˚C (Excluding DC fan)
Platform
Intel ATX 3.1 | PCIe Gen5.1
Power Supply Output Connectors
| 1x | Mainboard → 18+10 Pin |
| 6x | CPU | PCIe → 8 Pin |
| 4x | SATA | Molex → 6 Pin |
| 1x | 12V-2×6 → PCIe |
Output Protection
OPP (Overpower Protection)
OVP (Over Voltage Protection)
UVP (Under voltage protection)
SCP (Short Circuit Protection)
OCP (Over Current Protection)
OTP (Over Temperature Protection)
No-Load Protection
Reset Protection
| Output Voltage | 12V | 5V | 3.3V | -12V | 5VSB |
|---|---|---|---|---|---|
| Maximum Output | 100A | 20A | 20A | 0.3A | 3A |
| Maximum Capacity | 1200W | 120W | 3.6W | 15W | |
| DC Output | 1200W | ||||
| AC Output | 100-240V ~ 15-7.5A 50-60Hz | ||||
Extra
Scope of Delivery
1x AMD GH power supply unit
1x C13 Power cord 1500 mm
Cables
Textured
1x 18+10-Pin Mainboard 610 mm
2x 4+4-Pin CPU 650 mm
4x 6+2-Pin PCI-E 750 mm
1x 12V-2×6 720 mm
2x 6-Pin 4-SATA 450 – 150 | 150 | 150 mm
1x 6-Pin 2-SATA + 2-Molex 450 – 150 | 150 | 150 mm
Accessory Box
1x PSU bag
1x PSU tester
1x Zip tie bag
1x Screw pack
1x Velcro pack
1x Installation guide
Support
FAQ
Digital-RGB means that each LED chip can be controlled individually, allowing for multiple colors and effects in a single D-RGB LED strip. While regular RGB LED strips can only show the same color on each LED chip per strip at a time. However, not every Digital-RGB (Addressable) product is the same.
You don’t need the Nexlinq app directly for housing your PC in the Matrix-supported cases. However, the Nexlinq app is required to set up and customize the Matrix display (system stats, animations, lighting, and custom visuals). Without the app, the Matrix screen cannot be configured and will show the text ‘Matrix 600’ or ‘Matrix 900’ depending on the Matrix display size.
Are plug-and-play. No software is needed, yet it is compatible with software control through MSI or ASUS compatible motherboards if desired. Have custom developed color patterns. We believe D-RGB lighting can be stylish when having the right color/pattern settings, which is why the Phanteks D-RGB controller is pre-installed with custom selected color modes and patterns.
Have 30 LED chips. This is a lot! Having 30 LEDs per product instead of just 8 or 12 creates a much more beautiful color gradient and higher quality lighting. This also means more color tints can be displayed simultaneously in one strip.
Digital-RGB and RGB have a different connector. Digital-RGB uses a 3-pin connector while RGB uses a 4-pin connector. Technical explanation: Digital-RGB uses 5 Volts while RGB uses 12 Volts. Connecting Digital-RGB products and RGB products would cause damage.
Digital-RGB from Phanteks is compatible with Asus Addressable-equipped motherboards and MSI Mystic Light Rainbow-equipped motherboards. Check with the Motherboard specifications if your motherboard has a ‘AURA Addressable Header’ or a ‘Mystic Light Sync Rainbow header’ with 3 pins.
Each D-RGB product uses 1 Ampere. Check the power output with your motherboards specifications to determine how many D-RGB products can be powered by your mainboards. Currently mainboards support 3 Amperes.
The Phanteks D-RGB controller can support up to 7 D-RGB products when using the remote. If the D-RGB controller is connected to your motherboard a total of 9 D-RGB can be connected to the controller. A maximum of 4 D-RGB products can be connected to a single output port on the controller.
Most of the D-RGB products and compatible mainboards include a mainboard adapter. Simply connect this mainboard adapter to the Addressable or Rainbow port on your mainboard and the Phanteks D-RGB products. D-RGB products from Phanteks can be daisy-chained so you only need one port on your motherboard. Most mainboards also include this motherboard adapter cable.
You can install as many D-RGB controllers as you would like. However they do not connect to each other. Each controller will work, and need to be controlled, individually.
Press and hold the ‘Mode’ for 2 seconds until the LED’s turn off. When using software control please consult with the motherboard manufacturer.
