420RAD-30
Slim 420 radiator
The Glacier EZ-Fit 420RAD-30 is a slim 420 radiator. Its 30mm thickness makes it highly versatile for a wide array of chassis. The integrated fittings simplify your build, reducing the need for extra components while enhancing compatibility with both hard and soft tubing systems.
The core of the radiator is made from H90 copper tubing and pure copper fins with a density of 19 FPI. The outer steel frame ensures a rigid construction that protects the copper core for long lasting performance.
Colors
Specifications
General
Model No.
PH-GEF-RAD423_BK
UPC Code
886523901440
Product Type
Radiator
Color
Black
Materials
Copper | Stainless steel
Technical Details
Dimensions
Width x Height x Depth
470 x 140 x 30 mm | 18.50 x 5.51 x 1.18 in
Inlet Ports
1x M24
Outlet Ports
1x M24
Fittings
2x M24 EZ-Fit 16 mm fittings Pre-installed
Hard Tube Support
16 ± 0.1 mm OD | HI-PMMA | PMMA | Acrylic | PETG | Glass
Soft Tube Support
16 ± 0.1 mm OD | H10 ± 0.1 mm ID | PVC
Extra
Scope of Delivery
1x 420 radiator
Accessory Box
3x Fitting inserts
Screws
12x M4x5 mm screws
12x M4x30 mm screws
Support
Documentation
FAQ
Digital-RGB means that each LED chip can be controlled individually, allowing for multiple colors and effects in a single D-RGB LED strip. While regular RGB LED strips can only show the same color on each LED chip per strip at a time. However, not every Digital-RGB (Addressable) product is the same.
Are plug-and-play. No software is needed, yet it is compatible with software control through MSI or ASUS compatible motherboards if desired. Have custom developed color patterns. We believe D-RGB lighting can be stylish when having the right color/pattern settings, which is why the Phanteks D-RGB controller is pre-installed with custom selected color modes and patterns.
Have 30 LED chips. This is a lot! Having 30 LEDs per product instead of just 8 or 12 creates a much more beautiful color gradient and higher quality lighting. This also means more color tints can be displayed simultaneously in one strip.
Digital-RGB and RGB have a different connector. Digital-RGB uses a 3-pin connector while RGB uses a 4-pin connector. Technical explanation: Digital-RGB uses 5 Volts while RGB uses 12 Volts. Connecting Digital-RGB products and RGB products would cause damage.
Digital-RGB from Phanteks is compatible with Asus Addressable-equipped motherboards and MSI Mystic Light Rainbow-equipped motherboards. Check with the Motherboard specifications if your motherboard has a ‘AURA Addressable Header’ or a ‘Mystic Light Sync Rainbow header’ with 3 pins.
Each D-RGB product uses 1 Ampere. Check the power output with your motherboards specifications to determine how many D-RGB products can be powered by your mainboards. Currently mainboards support 3 Amperes.
The Phanteks D-RGB controller can support up to 7 D-RGB products when using the remote. If the D-RGB controller is connected to your motherboard a total of 9 D-RGB can be connected to the controller. A maximum of 4 D-RGB products can be connected to a single output port on the controller.
Most of the D-RGB products and compatible mainboards include a mainboard adapter. Simply connect this mainboard adapter to the Addressable or Rainbow port on your mainboard and the Phanteks D-RGB products. D-RGB products from Phanteks can be daisy-chained so you only need one port on your motherboard. Most mainboards also include this motherboard adapter cable.
You can install as many D-RGB controllers as you would like. However they do not connect to each other. Each controller will work, and need to be controlled, individually.
Press and hold the ‘Mode’ for 2 seconds until the LED’s turn off. When using software control please consult with the motherboard manufacturer.
