NV7-Distro
Distro Plate for NV7
Designed exclusively for the Phanteks NV7 chassis, the Glacier EZ-Fit NV7-DISTRO is a custom water-cooling distribution plate that redefines elegance and efficiency for PC cooling. Built with the best materials and integrated 16 mm EZ-Fit push-in fittings, it transforms your build into a showcase of engineering and art.
Configurations
Specifications
General
Model No.
PH-GEF_DIS-NV7
UPC Code
886523703433
Product Type
Distro plate
Color
N/A
Chassis Support
Phanteks NV7
Materials
Cast acrylic | Aluminum mounting hooks | Brass fitting | ABS fitting inserts | EPDM-NBR O-rings
Technical Details
Dimensions
Width x Height x Depth
212 x 488.24 x 40.45 mm | 8.34 x 19.22 x 1.59 in
Pump Compatibility
DDC
Not included
Liquid Capacity
277 ml
Inlet Ports
4x M24
Outlet Ports
4x M24
Fill Port
1x G¼ brass stop fitting Pre-installed
Plugs
2x M24 acrylic plug fitting Pre-installed
Fittings
8x M24 EZ-Fit 16 mm fittings Pre-installed
Hard Tube Support
16 ± 0.1 mm OD | HI-PMMA | PMMA | Acrylic | PETG | Glass
Soft Tube Support
16 ± 0.1 mm OD | H10 ± 0.1 mm ID | PVC
LED Number
39
LED Max. Rated Current
0.96A
Extra
Scope of Delivery
1x NV7 distro plate
Accessory Box
3x Fitting inserts
4x Mounting hooks
1x D-RGB LED cable Pre-Installed
1x 2.5 mm Hex key
1x 2 mm Hex key
Screws
4x M3x16 mm Mounting screws
4x M4x25 mm Pump screws
Support
FAQ
Digital-RGB means that each LED chip can be controlled individually, allowing for multiple colors and effects in a single D-RGB LED strip. While regular RGB LED strips can only show the same color on each LED chip per strip at a time. However, not every Digital-RGB (Addressable) product is the same.
Are plug-and-play. No software is needed, yet it is compatible with software control through MSI or ASUS compatible motherboards if desired. Have custom developed color patterns. We believe D-RGB lighting can be stylish when having the right color/pattern settings, which is why the Phanteks D-RGB controller is pre-installed with custom selected color modes and patterns.
Have 30 LED chips. This is a lot! Having 30 LEDs per product instead of just 8 or 12 creates a much more beautiful color gradient and higher quality lighting. This also means more color tints can be displayed simultaneously in one strip.
Digital-RGB and RGB have a different connector. Digital-RGB uses a 3-pin connector while RGB uses a 4-pin connector. Technical explanation: Digital-RGB uses 5 Volts while RGB uses 12 Volts. Connecting Digital-RGB products and RGB products would cause damage.
Digital-RGB from Phanteks is compatible with Asus Addressable-equipped motherboards and MSI Mystic Light Rainbow-equipped motherboards. Check with the Motherboard specifications if your motherboard has a ‘AURA Addressable Header’ or a ‘Mystic Light Sync Rainbow header’ with 3 pins.
Each D-RGB product uses 1 Ampere. Check the power output with your motherboards specifications to determine how many D-RGB products can be powered by your mainboards. Currently mainboards support 3 Amperes.
The Phanteks D-RGB controller can support up to 7 D-RGB products when using the remote. If the D-RGB controller is connected to your motherboard a total of 9 D-RGB can be connected to the controller. A maximum of 4 D-RGB products can be connected to a single output port on the controller.
Most of the D-RGB products and compatible mainboards include a mainboard adapter. Simply connect this mainboard adapter to the Addressable or Rainbow port on your mainboard and the Phanteks D-RGB products. D-RGB products from Phanteks can be daisy-chained so you only need one port on your motherboard. Most mainboards also include this motherboard adapter cable.
You can install as many D-RGB controllers as you would like. However they do not connect to each other. Each controller will work, and need to be controlled, individually.
Press and hold the ‘Mode’ for 2 seconds until the LED’s turn off. When using software control please consult with the motherboard manufacturer.
