AMP GH

Fully Modular Power Supply

Introducing the Phanteks AMP GH Series, these units revolutionize cable management with sleek, individually textured cables for a pristine setup. Enhanced with a 120mm Fluid Dynamic Bearing Fan, they deliver temperature-controlled operation in Hybrid Fanless mode, ensuring virtually silent performance.

With the latest PCIe Gen 5.1 GPU cable technology, the 12V-2×6 connector delivers up to 600W of power via a single cable. Engineered to meet ATX 3.1 specifications, the Phanteks AMP GH represents a superior and cost-effective choice for high-performance builds.

Colors

Black

White

Wattage

750

Gold

850

Gold

1000

Platinum

12V-2×6 Cable Included

  • Built to ATX 3.1 Specifications, ready to handle new and upcoming CPU and GPU hardware requirements.

  • Fully Modular Design, individually textured cables for easy installation and reduced clutter.
  • Latest PCIe Gen5.1 GPU Connector, 12V-2×6 connector providing up to 600W of power through a single cable.
  • Improves compatibility with any chassis.

Packed With Features

  • Ultra-High Power Density, Compact Size
    Ultra-high power density with a small footprint of only 140mm depth.
  • Gold-Plated High Current Terminals
    Reduces current transmission resistance for increased efficiency.
  • 120mm Fluid Dynamic Bearing Fan
    The fluid dynamic bearing (FDB) improves the lubrication of the bearing for increased stability and longevity.
  • Cable-Free Connection Design
    Backpanel and PCB are connected by a copper plate to improve output power quality.
  • Multi-GPU Support
    Multiple 6-Pin and 8-Pin output connectors support all multi GPU platforms.

Premium Hybrid Mode

A state-of-the-ar t fan control that allows the power supply to work entirely fanless under 40% load and enables the most quiet system setups.

Specifications

General

Model No.

PH-P750GH_WT01

UPC Code

EU | 886523510444
UK | 886523510505
US | 886523510567

Color

White

Dimensions

Length x Width x Height

140 x 150 x 86 mm | 5.5 x 5.9 x 3.4 in

Power Output

750W

PCIe GEN5 OUTPUT

450W

80 Plus

Gold

TECHNICAL DETAILS

Cooling Fan

120mm Hydraulic Bearing fan

Back Plate

Fully modular

MTFB

> 100.000 hrs at 25˚C (Excluding DC fan)

Power Supply Output Connectors

Mainboard – 1x
CPU | PCIe – 5x
SATA | Molex – 3x
12V-2×6 – 1x

Output Protection

OPP (Overpower Protection)
OVP (Over Voltage Protection)
UVP (Under voltage protection)
SCP (Short Circuit Protection)
OCP (Over Current Protection)
OTP (Over Temperature Protection)
No-Load Protection
Reset Protection

Output Voltage 12V 5V 3.3V -12V 5VSB
Maximum Output 62A 20A 20A 0.3A 2.5A
Maximum Capacity 744W 100W 3.6W 12.5W
DC Output 750W
AC Output 200-240V ~ 10A 50-60Hz

Extra

Net Weight

1.40 kg | 3.08 lbs

Gross Weight

3.20 kg | 7.05 lbs

Warranty

8 Years limited

Scope of Delivery

1x AMP GH 750W Power supply unit
1x C13 Power cord (1500mm)

Textured Cables

1x 18+10-Pin Mainboard (610 mm)
2x 4+4-Pin CPU (650 mm)
4x 6+2-Pin PCI-E (750 mm)
1x 12V-2×6 (720 mm)
3x 6-Pin 4-SATA (450 – 150 | 150 | 150 mm)
1x 6-Pin 2-SATA + 2-Molex (450 – 150 | 150 | 150 mm)

Accessory Box

1x User’s manual
1x Installation guide
1x PSU bag
1x PSU tester
1x Zip tie bag
1x Screw pack
1x Velcro pack

Support

FAQ

What is Digital-RGB?2024-05-30T12:24:53+00:00

Digital-RGB means that each LED chip can be controlled individually, allowing for multiple colors and effects in a single D-RGB LED strip. While regular RGB LED strips can only show the same color on each LED chip per strip at a time. However, not every Digital-RGB (Addressable) product is the same.

Phanteks D-RGB products2024-05-30T12:24:17+00:00

Are plug-and-play. No software is needed, yet it is compatible with software control through MSI or ASUS compatible motherboards if desired. Have custom developed color patterns. We believe D-RGB lighting can be stylish when having the right color/pattern settings, which is why the Phanteks D-RGB controller is pre-installed with custom selected color modes and patterns.

Have 30 LED chips. This is a lot! Having 30 LEDs per product instead of just 8 or 12 creates a much more beautiful color gradient and higher quality lighting. This also means more color tints can be displayed simultaneously in one strip.

Why are Digital-RGB and RGB not compatible?2024-05-30T12:23:51+00:00

Digital-RGB and RGB have a different connector. Digital-RGB uses a 3-pin connector while RGB uses a 4-pin connector. Technical explanation: Digital-RGB uses 5 Volts while RGB uses 12 Volts. Connecting Digital-RGB products and RGB products would cause damage.

Is Digital-RGB compatible with my mainboard?2024-05-30T12:26:57+00:00

Digital-RGB from Phanteks is compatible with Asus Addressable-equipped motherboards and MSI Mystic Light Rainbow-equipped motherboards. Check with the Motherboard specifications if your motherboard has a ‘AURA Addressable Header’ or a ‘Mystic Light Sync Rainbow header’ with 3 pins.

How many D-RGB products can I connect to a compatible mainboard?2024-05-30T12:27:34+00:00

Each D-RGB product uses 1 Ampere. Check the power output with your motherboards specifications to determine how many D-RGB products can be powered by your mainboards. Currently mainboards support 3 Amperes.

How many D-RGB products can I connect to the D-RGB controller from Phanteks?2024-05-30T12:28:14+00:00

The Phanteks D-RGB controller can support up to 7 D-RGB products when using the remote. If the D-RGB controller is connected to your motherboard a total of 9 D-RGB can be connected to the controller. A maximum of 4 D-RGB products can be connected to a single output port on the controller.

How do I connect my D-RGB product from Phanteks to my mainboard?2024-05-30T12:29:05+00:00

Most of the D-RGB products and compatible mainboards include a mainboard adapter. Simply connect this mainboard adapter to the Addressable or Rainbow port on your mainboard and the Phanteks D-RGB products. D-RGB products from Phanteks can be daisy-chained so you only need one port on your motherboard. Most mainboards also include this motherboard adapter cable.

Can I install multiple Digital-RGB controllers in my case?2024-05-30T12:29:44+00:00

You can install as many D-RGB controllers as you would like. However they do not connect to each other. Each controller will work, and need to be controlled, individually.

How do I turn off the D-RGB LED’s on the Phanteks D-RGB controller?2024-05-30T12:31:50+00:00

Press and hold the ‘Mode’ for 2 seconds until the LED’s turn off. When using software control please consult with the motherboard manufacturer.

Can’t find the answer you’re looking for?
Contact us through the SUPPORT button in the bottom right corner of the website.

Discover the AMP powersupply

These power supplies offer a dependable and efficient wattage output. Their fully modular design, complemented by individually braided cables and included cable combs, ensures seamless installation and reduced clutter.

2024-06-14T12:03:27+00:00June 3, 2024|Tags: , , , , |
Go to Top